Complete Inventory

CentriVap Centrifugal Vacuum Concentrator

Tue, 07 Feb 2012 00:54:33 +0000

The CentriVap Benchtop Vacuum Concentrator with acrylic lid is a compact evaporation system that utilizes centrifugal force, vacuum and heat to speed evaporation of multiple biological or analytical samples. Exclusive features include: 300-watt heater; Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump; and memory to store nine user-set programs. Other features include: centrifugal motion provided by a brushless motor capable of up to 1725 RPM; Quick-Stop System to stop vacuum pump, open valve and stop rotor; automatic vacuum release valve; lid latch with safety sensor; epoxy-coated, 12" diameter chamber to accommodate a variety of rotors; large, phenol-free lid seal; built-in vacuum delay; easy-to-read LCD display; separate heat and run times, each from 1 to 999 minutes; PREHEAT button to begin set point temperature elevation; audible alarm to signal completion of set point run time; electrical receptacle for connection of accessory vacuum pump; and vacuum port with quick disconnect fitting for connection of a gauge to monitor vacuum level. Make: Labconco Model: CentriVap 7810000 Category: Evaporators

Price:$1,995.00

Hinds PEM-90

Tue, 07 Feb 2012 00:54:33 +0000

The Hinds PEM-90 photoeleastic modulator controller incorporates many design features including: RS-232 interface allowing computer control of all PEM functions Digital set-up and display of retardation and source wavelength with automatic adjustment of retardation. Retardation function with high sinusoidal accuracy which results in noise-free modulation or chopping Make: Hinds Model: PEM-90 Category: lasers-lab

Price:$695.00

Packard 515TR Flow Scintillation Analyzer

Tue, 07 Feb 2012 00:54:33 +0000

This unit powers up and passes all start up diagnostics. I believe this unit has the homogeneous configuration but please look at pictures to be sure. As far as I can tell the unit works fine but I can not test beyond the power up. If you go to http://las.perkinelmer.com/Catalog/ProductInfoPage.htm?ProductID=A610P00 you will see that it is comparable to the Perkin Elmer 610TR Flow Scintillation Analyzer. More pictures at tx-aes.com/other/misc/packard-515tr-scintillation-analyzer.html Bios Version 3.11 SW Version 3.60 SN 427924 Shipping weight is 80 lbs and we will charge an extra $25.00 for packing. Make: Packard Model: 515TR Flow Scintillation Analyzer Category: HPLC Systems

Price:$1,495.00

LKB Ultramicrotome V Bromma 2088

Tue, 07 Feb 2012 00:54:33 +0000

The LKB Bromma Ultramicrotome V is designed for the production of long ribbons of uniform serial sections. The range of thickness provides for all forms of electron microscopy. Survey sections and semi-thin sections for light microscopy can be prepared at a predetermined thickness. Specimens can be trimmed accurately to the conventional pyramid shape or to a mesa of selected area. This LKB Ultramicrotome V comes equipped with a control unit, an Olympus S-Z microscope with 20X eyepieces on a sliding base, an Instruction Manual, and dust covers, all in excellent condition. Make: LKB Model: Ultramicrotome V Category: Microtomes

Price:$1,395.00

Matheson Tee Assembly for Acetylene

Tue, 07 Feb 2012 00:54:33 +0000

This Matheson Tee assembly consists of both male and female CGA 510 fitting for Acetylene gas connections and a Superior needle valve and a Matheson 400 one-way valve. This assembly would allow one tank of Acetylene to supply two separate devices. Make: Matheson Model: unknown Category:

Price:$49.00

General Purpose Regulator with Rotameter

Tue, 07 Feb 2012 00:54:33 +0000

This general purpose two stage regulator made by Specialty Gases, M# SP22492, is in excellent condition. It is equipped with a CGA 590 fitting for use with air, N2, O2, Inert gases, CO2 and N2O. The input gauge reads up to 4,000 psi and the output gauge reads up to 100 psi. It is equipped with a rotameter (4-40 LPM) and hose barb outlet. Make: Specialty Gases Model: 22492 Category: Regulators

Price:$165.00

Wallac 1470 Two motors and Four belts

Tue, 07 Feb 2012 00:54:33 +0000

These two motors, Wallac motor unit 10 85 6890, and the four belts they drive are in good operating condition. They are ready to install. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$280.00

Wallac 1470 Gamma Counter Front Panel with Keypad

Tue, 07 Feb 2012 00:54:33 +0000

This front panel with keypad is complete and in good operating condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$175.00

Waters 486

Tue, 07 Feb 2012 00:54:33 +0000

The Waters 486 Tunable Absorbance Detector is a single-channel, tunable, ultraviolet/visible light detector designed for HPLC applications. The Waters 486 Detector provides a usable light intensity over the wavelength range 190 to 600 nanometers (nm), although its primary use is in the ultraviolet range between 190 and 380 nm. The maximum sensitivity of the instrument is 0.001 absorbance units full scale (AUFS). It calibrates and passes all self-tests. It is equipped with the IEEE 488 connection in the rear. This Waters 486, S# MX5MM4136M, is clean and in good working condition.

The Waters 486 operates at 100-240 VAC, 100 VA, 50/60Hz, and weighs 35 lbs..

Make: Waters Model: 486 Category: HPLC Detectors

Price:$995.00

Fisher Scientific Two Stage Regulator for Inert Gases

Tue, 07 Feb 2012 00:54:33 +0000

This Fisher Scientific two stage regulator with a CGA 580 fitting for Argon, Helium, Nitrogen and other inert gases is in good operating condition. It is equipped 4,000 psi gauge on the tank side with a 200 psi gauge (2) on the outlet side. It has a rod type handle; three units are available. Make: Fisher Scientific Model: Unknown Category: Regulators

Price:$100.00

Valco Two Position Valves & Control Modules X 4

Tue, 07 Feb 2012 00:54:33 +0000

This lot consists of four VICI Valco two-position control modules, Model ETCA; four Valco motor assembly/gearbox actuators, Model ETMA, and a motor driver output cable, P/N 1-22645. They are used with no sign of wear or leaks. They require a 24 VDC power source and can be operated by either manual or computer control. A VICI technical note 413 is included. One of the four two-position control modules is a model ETCA – CE, which requires a slightly different 24 VDC power connection. The ETMA actuators are equipped with six ports, and have the highest torque (slowest) of the four VICI models. Offers for part of this lot are welcomed. Make: Valco Model: ETCA, ETMA Category: HPLC

Price:$240.00

240 Clear Glass Vials 40 ml. and 20 ml.

Tue, 07 Feb 2012 00:54:33 +0000

This lot of clear borosilicate glass vials consists of 195 40 ml VWR Cat# 15900-010 vials packed in two sealed cases of 72 vials and 51 of 72 vials in another opened case. In addition there are another 46 20 ml. VWR Cat# 15900-008 vials in a partial case. The 195 vials are described as: VWR VIALS CLR GLASS 40ML CS72, Vial^ 40mL. With open-top cap and a 3.17mm fluoropolymer resin/silicone septum. Clear borosilicate glass. Not precleaned. Prepared in solvent-free facility to prevent possible volatile contamination. GPI finish: 24-414. DiameterxHeight: 27x95mm. The 46 vials are described as: VWR VIALS CLR GLASS 20ML CS72, Vial^ Prepared in solvent-free facility to prevent volatile contamination. For use in volatile organic analysis. Clear borosilicate glass with open-top cap and 3.17mm fluoropolymer resin/silicone septum. GPI finish: 24-414. Diameter x Height: 27x63mm. 20mL. Not precleaned. Make: VWR Model: 40 & 20 ml. Category: Vials

Price:$119.00

Amplifier Research 15A250M3 Low Power RF Amplifier

Tue, 07 Feb 2012 00:54:33 +0000

The Amplifier Research 15A250M3 Amplifier is a self-contained, broadband amplifier designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The AR 15A250M3, when used with an RF sweep generator, will provide a minimum of 15 watts of swept power at 10 kHz. - 250 MHz. The Amplifier Research 15A250M3 includes a front panel control which permits the operator to conveniently set the amplifiers desired output level. The AR 15A250M3 Amplifier provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for higher power amplifiers. This AR 15A250M3, S# 17519, operates at voltages from 90 to 135 VAC at 47 to 63 Hz. Make: Amplifier Researsh Model: 15A250M3 Category: Amplifiers

Price:$2,395.00

Fume-Gard

Tue, 07 Feb 2012 00:54:33 +0000

The Fume-Gard incorporates a squirrel cage fan which draws air through a charcoal filter and discharges it out the back. It is Model 9121 by Lerner Labs, operating at 115 VAC, 1.1 amps, 60 Hz. There are two types of replaceable filters, which are available from Thermo Shandon, the Charcoal filter and the fine particulate filter.

The Fume-Gard weighs 18 lbs. and has dimensions of 12 x 10 x 10 inches. It has a soft rubber cushion underneath to eliminate noise and vibration. Since the fan circulates a lot of air through the filter, the Fume-Gard is very effective at eliminating odors in the lab or any confined space. Make: Lerner labs Model: 9121 Category: Hoods

Price:$95.00

Sorvall Omni-Mixer 17105

Tue, 07 Feb 2012 00:54:33 +0000

This Sorvall, model 17105, Omni-Mixer is in like-new condition. It is a variable-speed homogenizer and/or cell disruptor, with a maximum speed of 16,000 RPMs. It operates at 115 V, 5 A, 50/60 Hz. The stainless steel sample cup has a 3mL capacity, with a working capacity of 2 mL. When it was received here, it was wrapped in a clear plastic bag, and it was quite apparent that it had never been operated. It comes complete, ready to use, mounted on a stand for easy access to the sample cup. The total weight is only 15 lbs. and it comes with a 30-day guarantee. Make: Sorvall Model: Omni-mixer Category: Homogenizers

Price:$315.00

Waters 410 Differential Refractometer

Tue, 07 Feb 2012 00:54:33 +0000

This Waters 410 differential refractometer, S 410-006928, seems to be in good operating condition. The display reads 0260 and remains steady. It operates at 110/220 VAC at 50/60 Hz using 150 VA max. The Waters 410 is designed for HPLC and GPC applications. This detector is particularly suited for determining the molecular distribution of polymers or carbohydrates in food products. The temperature-controlled optics and the patented countercurrent heat exchanger increase baseline stability for reproducible results. The 410 can be operated on its own or programmed from a Waters controller. Make: Waters Model: 410 Category: HPLC Detectors

Price:$2,395.00

VWR Dylatherm Hotplate

Tue, 07 Feb 2012 00:54:33 +0000

This VWR Dylatherm hotplate is in good operating condition. It is a Cat# 33918-432 hotplate with a 6.25 inch diameter circular heating surface, made of cast aluminum. The VWR Dylatherm operates at 120 VAC at 50/60Hz with a maximum power consumption of 500 Watts. Make: VWR Model: Dylatherm Category: Hotplates

Price:$125.00

HP 5890A display

Tue, 07 Feb 2012 00:54:33 +0000

This is a HP 5890A display, SLRW 9703, mounted on plastic front panel, SLRW 9706. It is a replacement part for a HP 5890A gas chromatograph. It weighs 1 lb. and has a 7-day non-DOA warranty. Make: Hewlett Packard Model: 5890A Category: GC Systems

Price:$195.00

Mettler Electronics 4.6 Liter Ultrasonic Cleaner

Tue, 07 Feb 2012 00:54:33 +0000

This Mettler Electronics Ultrasonic Cleaner, Model 4.6, S# 99M 5823, is in good operating condition. It has sturdy stainless steel construction with a 4.6 liter capacity and a 20 minute timer. It operates at 105/120 V 50/60 Hz using 2 amps. It’s footprint measures 6.5 x 10.5 inches. Make: Mettler Electronics Model: 4.6 Category: Biotechnology

Price:$295.00

Phast System

Tue, 07 Feb 2012 00:54:33 +0000

This Amersaham BioSciences Phast System consists of a separation and control unit, and a development unit. With the proper gel separation media ( i.e., IEF precast gels), accessories and a technical support package you can form a system that obtains fast, high-resolution, and reproducible results. With the PhastSystem, isoelectronic focusing is as easy to perform as gel electrophoresis; Coomassie staining is as easy as silver staining. PhastTransfer onto immobilizing membranes is a simple technical extension of the PhastSystem. Electrophoresis is performed on a thermostatic plate capable of maintaining temperatures accurately from 0 to +70 C. Multi-step programming capability allows gels to be pre run, loaded and run automatically. Controlled parameters include temperature, voltage, current, power, and volt-hours. The whole idea behind the PhastSystem is extreme ease of use and speedy runs. The stainless steel development unit is capable of processing two gels simultaneously at temperatures from ambient to +50 C. Up to nine different reagents can be used in a single processing program. These units are used, and have some flaws (broken plastic). They are both in good operating condition. A manual and what you see in the photos is included. The PhastSystem is currently supported by GE Healthcare. Make: Pharmacia Model: Phast System Category: Other

Price:$1,295.00

VWR 55850-105 Regulator with CGA 580 Fitting.

Tue, 07 Feb 2012 00:54:33 +0000

The VWR 55850-105 is designed for applications where a constant working pressure is important over a wide range of inlet pressures and flow rates. It features a solid brass body and a sintered inlet filter to eliminate scale, rust, and particulates from the gas stream. The VWR 55850-430 has a 1500 CFH flow capacity for compressed air, a 0-50 psi delivery pressure range, and 4,000 psi supply pressure capacity. It connects to a tank of compressed air with a CGA 580 fitting. It is equipped with a needle valve. Make: VWR Model: 55850-105 Category: Regulators

Price:$88.00

VWR 55850-474 Regulator with CGA 580 Fitting.

Tue, 07 Feb 2012 00:54:33 +0000

The VWR 55850-474 is designed for applications where a constant working pressure is important over a wide range of inlet pressures and flow rates. It features a solid brass body and a sintered inlet filter to eliminate scale, rust, and particulates from the gas stream. The VWR 55850-474 has a 1500 CFH flow capacity, a 0-50 psi delivery pressure range, and 4,000 psi supply pressure capacity. It connects to Argon, Helium, and Nitrogen compressed gas tanks with the CGA 580 fitting. Make: VWR Model: 55850-474 Category: Regulators

Price:$88.00

Matheson 50A Manual Packed Stem Valve for Acetylene

Tue, 07 Feb 2012 00:54:33 +0000

This Matheson 50A manual packed stem valve is equipped with a CGA 510 fitting which connects to an Acetylene tank. The Matheson 50A can function as a metering valve. Make: Matheson Model: 50A Gas Handling Category: The Matheson 50A can function as a metering valve. Make: Matheson Model: 50A Gas Handling Category:

Price:$50.00

Western Medica Regulator with CGA 280 Fitting

Tue, 07 Feb 2012 00:54:33 +0000

This Western Medica single stage regulator is in excellent condition. It is equipped with a CGA 280 fitting for use with mixed gases. The input gauge reads up to 2,800 psi and the output gauge reads up to 700 psi. Make: Western Medica Model: NA Category: Regulators

Price:$80.00

Fisherbrand 10-572-D Two Stage Regulator

Tue, 07 Feb 2012 00:54:33 +0000

This general purpose two stage regulator made by Fisherbrand, M# 10-572-D, is in excellent condition. It is equipped with a CGA 580 fitting for use with Argon, N2, and the inert gases. The input gauge reads up to 4,000 psi and the output gauge reads up to 200 psi. Make: Fisherbrand Model: 10-572-D Category: Regulators

Price:$110.00

Wallac 1470 Interface Board DIC 1055 3760 C

Tue, 07 Feb 2012 00:54:33 +0000

This Wallac interface circuit board - DIC 1055 3760 C - appears to be in good condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$200.00

Finnigan MAT Particle Beam Interface

Tue, 07 Feb 2012 00:54:33 +0000

This Finnigan MAT particle beam interface appears to be complete and in good condition. With a tag that reads “WTC particle interface”, and a part # 70005-60025 Rev E, and a serial # 012-0002, the FM BPI contains a PBI control board, 70005-61020 Rev F. It operates on an input of 220 VAC 50/60 Hz at 30 amps through a twist-lock connection. There are no He connections in the rear. Make: Finnigan MAT Model: PBI Category: Mass Spectrometer

Price:$288.00

Calibrated OHAUS Triple Beam Balance plus Weights

Tue, 07 Feb 2012 00:54:33 +0000

This Ohaus triple beam balance, which typically weighs up to 610 grams with an accuracy of 0.1 grams, has a range of up to 2610 grams ( ~ 5 lbs 2 ounces), with the inclusion of the three additional weights, two one kilogram equivalents, and one 500 grams equivalent. This balance and the three weights have just been calibrated to NIST standards by the Cal Lab of San Antonio, Texas. The calibration certificate, with the owners name blank, is included in the sale. This great mechanical scale for the lab or the classroom is a classic used around the world. It was carefully packed for safe transport to your location. Make: OHAUS Model: Triple Beam ;Category: Scales

Price:$210.00

Perkin-Elmer EDL System 2 Power Supply

Tue, 07 Feb 2012 00:54:33 +0000

This PE System 2 electrodeless discharge lamp power supply appears to be in good operating condition. It was previously used with a PE Simma AA Spectrometer. It powers up, and includes the cords shown in the photos. Make: Perkin-Elmer Model: EDL System 2 Category: Atomic Absorption

Price:$295.00

Finnigan MAT DEP Controller

Tue, 07 Feb 2012 00:54:33 +0000

This Finnigan MAT direct exposure probe controller is in good operating condition. It has J1, J2 and F1 connections on its right side. Make: Finnigan MAT Model: Dep Category: Mass Spectrometer

Price:$255.00

CDS 120 - 382 Extended Pyroprobe

Tue, 07 Feb 2012 00:54:33 +0000

This CDS 120 Pyroprobe and 382 Extended Pyroprobe is used to perform solids pyrolysis in preparation for analysis. It is S# 175807140, and operates at 115 VAC, 50/60 Hz. It appears to be in good operating condition. There are no probes or accessories included in the sale. Make: CDS Model: 120/382 Pyroprobe Category: Other

Price:$330.00

Harris Touchpad and Digital Display

Tue, 07 Feb 2012 00:54:33 +0000

This data entry touchpad and digital display with a 28915 circuit board was removed from a Harris Manufacturing Company’s M# SLT-29LS-90D14 freezer. It controls temperature and alarm functions. It is in good working condition. Make: Harris Model: Touchpad Category: Freezers/Fridges

Price:$105.00

Precision Inserts Cat 51231124

Tue, 07 Feb 2012 00:54:33 +0000

This lot consists of a set of 4 Precision Inserts - Cat 51231124. Each of these inserts holds 4 x 15 ml conical tubes. They fit into the buckets of a Precison Durafuge 300 centrifuge. They are in excellent condition. They are available for less than half of the cost of a new set. Make: Precision Model: 51231124 Category: Centrifuge - Benchtop

Price:$95.00

Precision Inserts Cat 51231117

Tue, 07 Feb 2012 00:54:33 +0000

Set of 4 Precision Inserts - Cat 51231117. Each of these inserts holds 2 x 50 ml conical tubes. They fit into the buckets of a Precison Durafuge 300 centrifuge. They are in excellent condition. They are available for less than half of the cost of a new set. Make: Precision Model: 51231117 Category: Centrifuge - Benchtop

Price:$95.00

Precision Inserts Cat 51231127

Tue, 07 Feb 2012 00:54:33 +0000

Set of 4 Precision Inserts - Cat 51231127. Each of these inserts hold up to 19 RIA 5ml tubes. They fit into the buckets of a Precison Durafuge 300 centrifuge. They are in excellent condition. They are available for less than half of the cost of a new set. Make: Precision Model: 51231127 Category: Centrifuge - Benchtop

Price:$95.00

Wallac POS. HV Suppy EPK 1055 2638 A Board

Tue, 07 Feb 2012 00:54:33 +0000

This Wallac POS. HV Suppy EPK 1055 2638 A circuit board appears to be in good opearting condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$150.00

Finnigan MAT DEP Probe & Controller

Tue, 07 Feb 2012 00:54:33 +0000

This Finnigan MAT DEP probe and controller were previously used with a FM TSQ 700 mass spectrometer. The probe (labeled "Solid P") is operated by a controller, P# 10007-60038 Rev M, operating at 220 VAC. After the temperature and temp. ramp were set on the controller, the probe heated rapidly. Make: Thermo Finnigan Model: DEP Category: Mass Spectrometer

Price:$895.00

Wallac 1470 Sonceboz Stepper motor

Tue, 07 Feb 2012 00:54:33 +0000

This Sonceboz stepper motor, M# 6500 R.416, with integrated control electronics was installed on the robot of a Wallac 1470. It was made in Switzerland. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$120.00

Waters LCM 1 Pressure Regulator Assembly

Tue, 07 Feb 2012 00:54:33 +0000

This is a Waters LCM 1 assembly consisting of a pressure regulator and four solenoids to control the flow of solvents. It is a replacement part for a Waters LC Module 1, integrated HPLC system. It weighs 2 lbs. and has a 7-day non-DOA warranty. Make: Waters Model: LC Module 1 Category: HPLC Systems

Price:$84.00

Edvotek Mineral Light Lamp M# H4-S

Tue, 07 Feb 2012 00:54:33 +0000

This Edvotek battery operated, solid state, mineral light generates shortwave UV light. It weighs 2.6 lbs. including the 5 “C” cell batteries required to power it. It has an 8 x 12 inch footprint and it’s made by UV Products, Inc. Make: Edvotek Model: M# H4-S Category: Lamps

Price:$49.95

Waters LCM1 Assorted components

Tue, 07 Feb 2012 00:54:33 +0000

This is an assortment of several parts of a Waters LCM1 system. They are replacement parts for a Waters LC Module 1, integrated HPLC system. They weigh 3 lbs. and have a 7-day non-DOA warranty. Make: Waters Model: LC Module 1 Category: HPLC Systems

Price:$78.00

HP 7673 18594-60100 Barcode Card

Tue, 07 Feb 2012 00:54:33 +0000

HP 7673B Controller Barcode Card. Tested working. Make: HP Model: 18594-60100 Barcode Category: GC Autosamplers

Price:$195.00

Wallac MCA Memory Board DIF 1055 6058 C

Tue, 07 Feb 2012 00:54:33 +0000

This Wallac MCA memory board - DIF 1055 6058 C - appears to be in good condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$200.00

Wallac 1470 Chains and Gear/shaft Assemblies

Tue, 07 Feb 2012 00:54:33 +0000

These chains and gears came from a Wallac 1470 Gamma Counter. They are in good operating condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$200.00

Wallac 1470 Boards & Sensors

Tue, 07 Feb 2012 00:54:33 +0000

This lot of small circuit boards and sensors appear to be in good operating condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$165.00

Neuro Data IR-183 Intracellular Recording Amplifier

Tue, 07 Feb 2012 00:54:33 +0000

The Neuro Data IR-183 Intercellular Recording Amplifier features a three way cell penetration system, which consists of an AC induced oscillation mode, a constant current mode, and a high voltage pulse mode. Controls are provided for each mode for pulse duration, pulse intensity, and polarity (except in the AC induced oscillation mode). The IR-183 comes equipped with a transient suppression system, a headstage grounding switch, a dye injection system, and a trace locator circuit. This Neuro Data IR-183, S# 0137, is in good condition. Make: Neuro Data Model: IR-183 Category: Biotechnology

Price:$1,275.00

Wallac 1470 Robot Assembly

Tue, 07 Feb 2012 00:54:33 +0000

This robot assembly from a Wallac 1470-05 Gamma Counter is in good operating condition. It is complete and ready to install. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$700.00

Wallac 1470 MCA A/D DIG circuit board

Tue, 07 Feb 2012 00:54:33 +0000

This MCA A/D WALLAC DIG 1055 6124 C circuit board appears to be in good operating condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$350.00

Wallac 1470 CRT Controller DCB 1055 5096 C

Tue, 07 Feb 2012 00:54:33 +0000

This Wallac CRT controller board - DCB 1055 5096 C - appears to be in good condition. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Wallac Model: 1470 Category: Scintillation counters

Price:$200.00

Schaffner power entry module from a Wallac 1470 Gamma Counter

Tue, 07 Feb 2012 00:54:33 +0000

This Schaffner filtered power entry module, FN 1394-6-05-11, is in good operating condition. It can be set for either 100-120 or 200-230 VAC. The item described above was removed from a Wallac 1470 Gamma Counter, S# 4700268, manufactured in Finland. The Wallac 1470 design is the predecessor to the current Perkin Elmer Wizard 2470-0050 with 5 detectors, a 550 sample capacity and MCA technology. Make: Schaffner Model: 1470 Category: Scintillation counters

Price:$80.00